Your pavers stop fading. That’s the first thing you’ll notice after a professional sealing—the color comes back, and it stays.
In Beverly Hills, FL, where we get over 230 sunny days a year, unsealed pavers don’t stand a chance. UV rays bleach them out within months. Rain washes joint sand away, leaving gaps where weeds push through and pavers start shifting.
Sealing locks everything in place. The joint sand hardens. Water beads off instead of soaking in. Algae and mildew can’t take hold because there’s no porous surface to cling to. You’re not out there pressure washing every few months or pulling weeds from between stones.
And if you’ve got a pool deck or patio, sealed pavers are safer. The right sealer adds slip resistance, even when wet. You’re not worrying about someone taking a fall after a rainstorm or a pool day.
This isn’t about making things look pretty for a weekend. It’s about protecting what you’ve already invested in and cutting down the time you spend maintaining it.
We’ve been serving Citrus County for nearly 30 years. We’re a family-owned paver sealing company in Beverly Hills, FL, and we’re the exclusive Seal ‘n Lock distributor in the county.
That means you’re getting commercial-grade sealants designed specifically for Florida’s climate. Not the stuff you pick up at a big box store. We’re also Authorized Contractors for Tremron, Flagstone, and Belgard—the manufacturers whose pavers are probably in your driveway or around your pool right now.
Most of our clients are homeowners in their 50s and 60s who’ve lived in Beverly Hills for years. They know their properties. They’ve seen what Florida weather does to outdoor surfaces, and they’re done with constant upkeep. We get that, and we don’t waste your time.
We start with a deep clean. That means removing dirt, algae, mildew, old sealant if there is any, and anything else sitting on the surface. We’re not sealing over problems—we’re fixing them first.
Next, we apply a UV inhibitor. This is what keeps your pavers from fading under Florida sun. It’s a step most companies skip, but it’s the difference between a sealer that lasts two years and one that lasts five.
Then we re-sand the joints with premium silica sand. This isn’t regular sand. Once it’s sealed, it hardens and locks your pavers in place. No shifting. No gaps. No weeds.
Finally, we apply three coats of commercial-grade sealer. Each coat bonds to the one before it, creating a protective barrier that repels water, resists stains, and makes cleaning easier. The whole process happens in one day, and you can walk on it within 24 hours.
You’re not dealing with a drawn-out project. You’re getting a complete paver sealing service in Beverly Hills, FL that’s done right the first time.
Ready to get started?
You get protection that’s built for Florida. Beverly Hills sits in a subtropical zone where humidity hovers around 75% year-round and summer temps regularly hit the low 90s. That’s a breeding ground for algae, mildew, and moisture damage.
Our sealers are formulated to handle that. They block UV rays, repel water, and prevent organic growth. If you’ve got a patio paver sealing project or a pool deck that’s seen better days, this is what brings it back.
We also stabilize your hardscape. Sealing interlocking pavers means locking in the joint sand so your surface stays level and secure. No more tripping hazards. No more pavers rocking underfoot.
And maintenance becomes simple. Sealed pavers don’t trap dirt the way unsealed ones do. A quick sweep or low-pressure rinse keeps them looking clean. You’re not scrubbing stains or dealing with discoloration every season.
Most manufacturers recommend resealing every two to three years depending on sun exposure. In Beverly Hills, where older homes and mature properties are the norm, that schedule keeps your outdoor spaces looking sharp without constant attention.
A quality paver sealing job in Beverly Hills, FL typically lasts two to three years. That timeline depends on sun exposure, foot traffic, and whether your pavers are around a pool or in a shaded area.
Pavers in direct sunlight break down faster because of UV exposure. Florida gets intense sun year-round, and that radiation degrades sealant over time. If your driveway or patio faces south or west, you’re looking at the shorter end of that range.
Pool decks also wear faster. Chlorine, saltwater, and constant moisture all affect the sealer. You might need to reseal every two years instead of three if your pavers are poolside.
We use commercial-grade sealants with UV inhibitors built in. That extends the lifespan compared to standard products. When it’s time to reseal, the process is faster because the base is already protected. You’re just refreshing the top layer.
Cleaning removes dirt and algae. Sealing prevents them from coming back and adds a protective layer that extends the life of your pavers.
When you pressure wash pavers, you’re getting rid of surface grime. That’s useful, but it doesn’t stop the problem. Unsealed pavers are porous, so moisture seeps in, joint sand washes out, and within weeks, you’re back where you started.
Sealing fills those pores. Water can’t penetrate, so algae and mildew don’t have anywhere to grow. Stains sit on the surface instead of soaking in, which makes them easier to clean. And because the joint sand is locked in place, your pavers stay stable.
If you’ve been cleaning your pavers every year and they still look worn, it’s because cleaning doesn’t protect. Sealing does. You’ll spend less time maintaining them and more time actually using your outdoor space.
Not if the right sealer is used. We apply sealers with slip-resistant additives specifically for pool decks and high-traffic wet areas.
Standard sealers can create a slick surface when wet, which is a problem around pools. That’s why we use products designed for traction. They dry with a slightly textured finish that gives you grip, even when water’s present.
This is especially important in Beverly Hills, where afternoon thunderstorms are common from June through September. Your pool deck or patio can go from dry to soaked in minutes. You don’t want anyone slipping because the sealer wasn’t chosen correctly.
We’ve been sealing pool decks and outdoor surfaces since 1995. We know which products work for Florida conditions and which ones don’t. If safety’s a concern—and it should be—ask about slip resistance before anyone touches your pavers.
Yes. Sealing brings back color and protects against future fading, but the pavers need to be properly cleaned and prepped first.
Faded pavers haven’t lost their color permanently—they’ve just been bleached by UV exposure and weathering. A deep clean removes the oxidized layer and reveals the original tone underneath. Once that’s done, sealing locks in the color and prevents further damage.
Stains are trickier. Oil, rust, and organic stains often require specific treatments before sealing. We assess the surface first and let you know what’s realistic. Some stains lift completely. Others fade but don’t disappear. Either way, sealing prevents new stains from setting in.
If your pavers are in rough shape, restoration is an option before sealing. That might include re-leveling, replacing damaged stones, or re-sanding joints. We’ll walk you through what’s needed so you’re not surprised by the scope or the cost.
Paver sealing in Beverly Hills, FL generally runs between $1.25 and $4.00 per square foot depending on the condition of your pavers and the level of service.
Basic sealing—cleaning and one or two coats of standard sealer—falls on the lower end. Premium service includes deep cleaning, UV inhibitors, joint re-sanding with silica sand, and three coats of commercial-grade sealer. That’s the higher end, but it also lasts longer and performs better in Florida’s climate.
The size of your project matters too. A 500-square-foot patio costs less per square foot than a 200-square-foot walkway because of setup and labor efficiency. Pool decks, driveways, and large patios usually get better per-foot pricing.
We don’t give quotes over the phone because every property is different. We need to see the surface, check for damage, and understand what you’re starting with. Once we do, you’ll get a clear price with no surprises.
Yes. Old sealer breaks down over time, and once it’s gone, your pavers are exposed again.
Even high-quality sealers degrade under Florida sun and weather. After two or three years, the protective layer thins out. Water starts soaking in, colors fade, and joint sand loosens. You’ll notice weeds growing between pavers or algae showing up after it rains.
If your pavers were sealed five or more years ago and haven’t been touched since, they’re likely due for a full restoration. That means stripping any remaining sealer, deep cleaning, re-sanding, and applying fresh coats.
Resealing is cheaper than replacing pavers, and it’s a lot less disruptive. Most homeowners in Beverly Hills reseal every two to three years to keep their hardscapes in good shape. It’s routine maintenance, not an emergency repair—and that’s the point.
Local Resources
Useful Links
Other Services we provide in Beverly Hills
