Your pavers look better. The color comes back, that washed-out gray disappears, and you’re not staring at stains every time you walk outside. That’s the immediate win.
But here’s what matters more: you stop the clock on deterioration. Florida’s humidity, rain, and relentless sun break down unsealed pavers fast. Sealing interlocking pavers creates a barrier that keeps moisture out, locks sand in place, and prevents weeds from turning your patio into a garden bed you didn’t ask for.
You’re also avoiding the expensive fix later. Stripping failed sealer jobs costs four times what proper sealing does upfront. When you seal it right the first time, you’re not dealing with delamination, trapped moisture, or having to call someone else to undo the damage. You’re protecting an investment that likely cost you $10,000 or more—and you’re doing it before the problem gets worse.
Mainstreet Landscaping is a family-owned business that’s been serving Citrus County for nearly 30 years. We’re not new to this, and we’re not treating your property like a training ground.
We’re Authorized Contractors for Tremron, Flagstone, and Belgard—which means we know how these pavers are built, how they age in Florida’s climate, and how to seal them correctly. We’re also the exclusive Seal ‘n Lock distributor in the county, so you’re getting commercial-grade products that most companies in Wiscon, FL don’t have access to. Our crews are state-licensed, and we handle everything from paver installation to sealing, so you’re working with people who understand the full picture.
We start with a thorough cleaning. That means removing dirt, algae, mildew, and any stains that have built up. If your pavers have old, failed sealer on them, we strip it first—because sealing over a bad job just makes things worse.
Next, we apply an inhibitor that stops future growth and prep the surface. Then we re-sand the joints to lock everything in place. This step matters more than most people realize—it’s what keeps your pavers from shifting and prevents weeds from coming back.
Finally, we apply the sealer itself. We use a spray system that ensures even coverage and the right thickness. Too thick and you trap moisture. Too thin and you’re not actually protecting anything. We’re using Seal ‘n Lock products designed specifically for Florida’s high humidity and water table, so the sealer breathes while still doing its job. You’ll see the color come back immediately, and the protection lasts years—not months.
Ready to get started?
You’re getting a full cleaning, inhibitor treatment, re-sanding, and three coats of commercial-grade sealer—all done in one day with our Ure-Seal system. That’s not standard. Most companies stretch this out or skip steps entirely.
The sealer we use is UV-resistant, which matters in Wiscon, FL where the sun doesn’t take a day off. It’s also flexible enough to handle Florida’s temperature swings and moisture levels without cracking or peeling. You’re not dealing with a thick coating that looks good for six months and then starts failing.
We’re also handling patio paver sealing, pool decks, driveways, and walkways—basically any hardscape that’s taking a beating from the weather. And because we’re local, we know what works here. We’ve seen what fails after hurricane season, what holds up through summer storms, and what actually lasts in Citrus County’s specific conditions. You’re not getting a one-size-fits-all approach from a company that services five states. You’re getting a process that’s been refined over decades in the exact climate you’re dealing with.
Properly applied sealer typically lasts three to five years in Florida, depending on traffic and exposure. Pool decks and driveways see more wear, so they’re on the shorter end. Patios and walkways with less foot traffic can push closer to five years before needing a fresh coat.
The bigger factor is how it’s applied in the first place. If the sealer is too thick or the wrong type for Florida’s humidity, it fails early—sometimes within a year. That’s why the product and application method matter more than the brand name on the label. We use sealers designed to breathe in high-moisture environments, which is the only way they hold up here long-term.
The main difference is knowing which sealer to use and how to apply it without trapping moisture. Florida’s water table and humidity make this tricky. Most DIY jobs fail because the sealer is too thick, applied in the wrong conditions, or incompatible with the pavers themselves.
You also need the right equipment. A brush or roller doesn’t give you even coverage, and that leads to blotchy spots or areas that wear faster. Professional spray systems apply consistent coats at the right thickness. And if there’s old sealer that needs stripping first, that’s not a weekend project—it requires chemical strippers and pressure washing at the right PSI, or you damage the pavers.
The cost of fixing a failed DIY sealing job is usually double what professional service costs upfront. You’re paying to strip the bad sealer, repair any damage, and then seal it correctly. It’s one of those things that looks simple until it isn’t.
It can, if the wrong sealer is used. High-gloss sealers look great but turn into slip hazards when wet, especially around pool decks. That’s why we use sealers with slip-resistant additives for any area that gets wet regularly.
The texture of your pavers also plays a role. Smooth pavers are naturally more slippery than textured ones, so the sealer choice has to account for that. We test traction before and after application to make sure you’re not creating a safety issue while trying to protect your investment.
If you’ve already had your pavers sealed and they’re slippery now, that’s fixable. We can add a non-slip topcoat or adjust the finish. But it’s a lot easier to do it right the first time than to go back and correct it later.
Wait at least 60 to 90 days after installation before sealing. New pavers need time to cure and settle, and the jointing sand needs to compact naturally. If you seal too early, you can trap efflorescence—that white hazy residue that comes from moisture and salts in the pavers—and it becomes permanent under the sealer.
Some installers will tell you to seal immediately, but that’s usually because they want to finish the job and move on. It’s not in your best interest. Let the pavers weather a bit, let a few rainstorms wash away surface residue, and then seal once everything has stabilized.
If your pavers are already installed and you’ve waited longer than 90 days, that’s fine too. There’s no magic deadline. The goal is just to avoid sealing before the pavers are ready, because once that sealer is on, you’re locked in.
They fade. Fast. Florida sun bleaches the color out of pavers within a year or two, and once that happens, you can’t get it back without sealing. You’ll also deal with constant staining—oil, rust, organic matter—all of it soaks into unsealed pavers and becomes nearly impossible to remove.
Weeds and ants move in next. The sand between pavers washes out with every heavy rain, and that creates gaps where weeds take root. Ants burrow underneath and destabilize the base. You end up with shifting pavers, uneven surfaces, and a bigger repair bill than sealing would have cost in the first place.
Unsealed pavers also hold moisture, which leads to mold, mildew, and algae growth. In Florida’s humidity, that’s not a minor cosmetic issue—it’s a constant maintenance headache. Sealing doesn’t make your pavers indestructible, but it stops most of these problems before they start.
Yes, but only if the old sealer is still in good shape or completely removed first. If the existing sealer is peeling, flaking, or delaminating, we have to strip it down to bare pavers before applying anything new. Sealing over failed sealer just locks in the problem and makes it worse.
Stripping old sealer is time-consuming and costs more than a standard sealing job, but it’s the only way to do it right. We use chemical strippers and pressure washing to get down to clean pavers, and then we start fresh. If the old sealer is still intact and just faded, we can clean the surface and apply a fresh topcoat without stripping.
The key is evaluating what’s already there. Not every paver sealing company in Wiscon, FL will tell you when stripping is necessary—they’ll just seal over the mess and hope it holds. It won’t. If your pavers have been sealed before and you’re not sure what condition they’re in, we’ll walk the property and give you an honest assessment before quoting anything.
Local Resources
Useful Links
Other Services we provide in Wiscon
